Washable thermographic paint for infrared cameras HEWP-LT-MWIR-BK-21

LabIR® Paint

Washable thermographic paint for special applications

HEWP-LT-MWIR-BK-11

Washable thermographic spray paint with high emissivity for special applications at room temperature. The paint can be easily removed with water without the use of aggressive mechanical methods or chemical agents. Ideal for measurement of places where you can´t use a permanent paint. Guaranteed physical properties and the dependence of emissivity on the wavelength and camera viewing angle allow you to achieve highly precise results of non-contact temperature measurement.

Price: 15.99 EUR

Basic feetures

  • paint with high emissivity
  • water washable
  • stable over time
  • almost opaque
  • suitable for uncooled infrared cameras and special applications
  • ecological
  • suitable for room temperature
  • application: turbine blades, sheet metal, glass, floors etc.

Colour:
 black
Contents:
400 ml

Where to use LabIR® Paint thermographic paint

Science and research

Metallurgy

Power engineering

Building

Properties

We can guarantee all mentioned thermographic paint properties only if you follow the instructions for using the paint that are introduced below on this website.

Optical properties

  • almost opaque in the bands of commonly used infrared cameras
  • band normal emissivity 0.98 (for bands 3 to 5 μm)
  • band normal emissivity of 0.96 (for the band 7.5 - 13 μm)
Band emissivity dependence on the viewing angle for the band 7.5 - 13 μm
Angle (°) Emissivity
5 0.981
10 0.981
20 0.980
30 0.979
40 0.975
45 0.974
50 0.968
60 0.960
70 0.947
80 0.904
Spectral dependence of transmissivity
Wavelength (μm) Transmissivity (%)
3.25 1.8
3.50 1.8
3.75 2.1
4.00 1.9
4.25 2.7
4.50 2.7
4.76 2.9
5.01 3.1
5.25 3.3
5.50 3.4
5.75 3.3
6.00 3.5
6.25 3.0
6.50 1.3
6.75 0.4
7.01 0.3
7.24 0.7
7.52 2.0
7.76 2.6
8.00 2.9
8.26 3.2
8.50 3.2
8.76 3.4
9.00 3.3
9.26 2.9
9.50 2.5
9.75 2.5
10.01 3.7
10.25 4.6
10.50 4.9
10.76 5.0
11.03 5.2
11.27 3.1
11.52 2.6
11.79 5.0
12.00 5.9
12.23 6.3
12.53 6.4
12.77 6.6
13.03 6.9
13.23 7.1
13.50 7.1
13.72 6.5
14.01 4.0
14.25 5.6
14.48 7.3
14.73 7.9
15.07 8.3
15.25 8.4
15.53 8.3
15.71 8.2
16.00 7.8
16.20 8.0
16.51 8.1
16.73 8.1
17.06 8.1
17.28 8.3
17.52 8.5
17.76 8.5
18.00 8.2
18.26 8.1
18.52 7.7
18.79 7.3
19.06 6.3
19.21 6.2
19.49 6.5
19.79 7.2
19.94 7.6
Spectral dependence of normal emissivity
Wavelength (μm) Emissivity
1.52 0.956
2.50 0.988
2.87 0.986
3.26 0.983
3.40 0.984
3.52 0.983
4.00 0.981
4.50 0.974
5.01 0.970
5.50 0.968
5.70 0.966
5.83 0.968
5.96 0.965
6.11 0.969
6.25 0.971
6.81 0.997
7.01 0.997
7.52 0.981
7.65 0.978
7.83 0.974
8.00 0.972
8.64 0.968
8.97 0.968
9.19 0.971
9.43 0.973
9.57 0.977
9.93 0.968
10.13 0.959
10.54 0.952
11.03 0.949
11.52 0.975
12.12 0.940
12.53 0.938
13.23 0.931
13.57 0.932
14.09 0.963
14.57 0.926
15.07 0.919
15.53 0.919
16.00 0.923
16.51 0.921
17.06 0.921
17.52 0.917
18.00 0.919
18.52 0.925
19.06 0.939
19.49 0.936
19.94 0.925

Other properties

  • coatings thickness 150 μm (according to recommended application)

Documents to download

Chemical composition

ethanol, diethyl ether, carbon black, titanium dioxide, xylene

Warning

pictogram flammeable pictogram exclam pictogram pullution

Extremely flammable aerosol. Product container is under pressure. When it is heated, it can explode. It causes serious eye irritation. It may cause drowsiness and dizziness. Repeated exposure may cause skin dryness or cracking. If medical help is needed, keep handy product container or label. Keep out of the reach of children. Before using, be sure to read the information on the label. Do not breathe aerosol. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Pressure container: Do not pierce or burn even after use. Do not spray on an open flame or other ignition source. Protect from sunlight. Avoid temperatures exceeding 50 °C.

Recycling

Contents / Dispose of container in accordance with local/regional/national/ international regulations.

Instructions for use

  1. Abrade the surface, clean it, dry it and get rid of grease. Cover other areas where spraying is not to be applied.
  2. Shake the canister for two minutes and make a test spray.
  3. Spray from a distance of 25-30 cm. Apply two thin layers.
  4. Between the applications of individual layers, do not wait for curing
  5. Spray at temperatures 15-25°C. Paint hardening occurs after two hours.
  6. After use, turn the container upside down and clean the valve by pressing for a few seconds.

Paint demand

  • Price per item: 15.99 EUR
  • Shipping: The shipping price depend on weight and location, we will send you an offer by e-mail.
  • Availability: In stock
  • Payment method: transfer to account
  • After receiving your demand, we will contact you.
  • *Compulsory data
Basic info
Billing address
Delivery address
Selected product

Do you need help?

Contact us and we will be glad to help you with your options.

+420 377 634 832
We use cookies to ensure operations of this website and better quality of our services. If you continue without changing your settings, we'll assume that you agree to receive all cookies. You can change your cookie settings in your web browser. More information