HERP-LT-MWIR-BK-11

LabIR® Paint

Thermographic paint for standard applications

HERP-LT-MWIR-BK-11

Special thermographic spray paint with high emissivity for common applications up to 100 °C. Precisely defined physical properties and emissivity dependence on the wavelength and viewing angle of an infrared camera allow accurate results of the non-contact temperature measurement

Price: 10.89 EUR (9.00 EUR without VAT)

Elementary properties

  • paint with high emissivity
  • high mechanical resistance
  • almost opaque
  • for everyday use
  • suitable for uncooled infared camera
  • for temperatures up to 100°C
  • suitable for application in electrical equipment (very low conductivity)

Colour:
 black
Volume:
400 ml
Yield of paint:
0.5 m2

Properties

We can guarantee all mentioned thermographic paint properties only if you follow the instructions for using the paint that are introduced below on this website.

Optical properties

  • transmissivity to 1,5% in the bands of commonly used infrared cameras
  • band normal emissivity 0.92 (for band 3 to 5 μm)
  • band normal emissivity of 0.92 (for band 7.5 - 13 μm)
Band emissivity dependence on the viewing angle for band 7.5 - 13 μm
Angle (°) Emissivity
5 0.963
10 0.961
20 0.959
30 0.954
40 0.947
45 0.941
50 0.931
60 0.899
70 0.823
80 0.661
Spectral dependence of transmissivity
Wavelength (μm) Transmissivity (%)
2.00 0.1
2.25 0.1
2.50 0.2
2.75 0.2
3.00 0.2
3.25 0.4
3.50 0.1
3.75 0.7
4.00 0.9
4.25 1.3
4.50 1.5
4.75 1.8
5.00 2.1
5.25 2.6
5.50 2.9
5.75 0.0
6.00 0.0
6.25 1.6
6.50 3.5
6.75 3.0
7.01 1.9
7.24 1.0
7.49 0.9
7.74 0.0
8.00 0.0
8.26 0.6
8.45 0.4
8.76 0.0
9.00 0.1
9.26 0.0
9.50 0.1
9.75 0.5
10.01 0.9
10.25 2.4
10.50 4.4
10.76 5.1
10.99 5.5
11.22 4.8
11.52 1.4
11.73 0.4
12.00 0.3
12.23 2.9
12.53 6.5
12.77 7.2
13.03 7.8
13.23 4.3
13.50 2.2
13.50 2.2
13.72 6.5
14.01 6.2
14.25 4.6
14.48 6.4
14.73 8.1
14.99 10.7
15.25 11.1
15.53 11.3
15.81 12.1
16.00 12.3
16.20 13.0
16.51 13.9
16.73 14.5
17.06 14.7
17.28 14.4
17.52 14.5
17.76 14.3
18.00 13.9
18.26 14.4
18.52 14.3
18.79 15.0
19.06 14.2
19.21 15.7
19.49 15.4
Spectral dependence of normal emissivity
Wavelength (μm) Emissivity
2.00 0.925
2.50 0.925
3.00 0.940
3.50 0.931
4.00 0.923
4.50 0.922
5.00 0.923
5.50 0.926
6.00 0.933
6.50 0.927
7.01 0.934
7.49 0.942
8.00 0.914
8.50 0.931
9.00 0.922
9.50 0.911
10.01 0.912
10.50 0.910
10.99 0.915
11.52 0.919
12.00 0.901
12.53 0.909
13.03 0.913
13.50 0.910
14.01 0.916
14.48 0.911
14.99 0.909
15.53 0.910
16.00 0.911
16.51 0.910
16.95 0.909
17.52 0.908
18.00 0.907
18.52 0.906
19.06 0.909
19.49 0.907

Thermal conductivity

  • 0.75 W/mK (50°C)
  • 0.70 W/mK (100°C)

Other properties

  • Coating thickness 30 μm (according to recommended application))
  • Coating roughness Ra = 0.8 μm, Rz = 9.6 μm

Documents to download

Chemical composition

acetone, n-butyl acetate, butan-1-ol, propan-2-ol.

Warning

pictogram flammeable pictogram exclam pictogram pullution

Extremely flammable aerosol. Product container is under pressure. When it is heated, it can explode. It causes serious eye irritation. It may cause drowsiness and dizziness. Repeated exposure may cause skin dryness or cracking. If medical help is needed, keep handy product container or label. Keep out of the reach of children. Before using. Be sure to read the information on the label. Do not breathe aerosol. Keep away from heat/sparks/open flames/ hot surfaces. No smoking. Pressure container: Do not pierce or burn even after use. Do not spray on an open flame or other ignition source. Protect from sunlight. Avoid temperatures exceeding 50 °C

Recycling

Contents/ Dispose of container in accordance with local/regional/national/international regulations.

Instructions for use

  1. Abrade the surface, clean it, dry it and get rid of grease. Cover other areas where spraying is not to be applied.
  2. Shake the canister for two minutes and make a test spray.
  3. Spray from a distance of 25-30 cm. Apply four thin layers, wait for a while and then apply four thin layers again.
  4. Spray at temperatures 15-25°C. Paint hardening occurs after two hours.
  5. After use, turn the canister upside down and clean the valve by pressing for a few seconds.

Paint demand

Order

Do you need a help?

Contact us and we will be glad to help you with your options.

+420 377 634 832